[ Pen turning ] Making Fountainpen / Silver,Gold,Wood

Posted by


Pure Silver 95% + Copper 5% Rate
Make accurate measurements Heat it with oxygen + LPG gas torch
Alloy (dissolve) After applying heat,
Be sure to do acid washing Dilute at a rate of 90% water + 10% sulfuric acid solution,
Warm it up and use it In the silver bullion state which melted silver,
Basic forging must be done To make the silver tissue fine
To prevent it from splitting Heat the hardened silver material after processing Make it soft This operation is called “Annealing” Annealing of “non-ferrous metals” means that
Unlike “Quenching” or “Tempering”, Cools regardless of temperature or speed Roll pressing the silver plate on the electric roller When using an electric roller,
Never wear gloves. It’s dangerous Until you get the right size and thickness,
I roll repeatedly The hammerhead’s texture is made from corrosion. Hit freely,
Create your own unique texture I wear so nice clothes
I think you’re dazzling. Ha Ha Ha … When sawing
We recommend keeping it vertical Collect silver powder
Can be melted back and utilized as silver So that the texture of the surface
Utilizes wood hammers, plastic hammers, urethane hammers, etc. What I apply when soldering is borax(Flux) While cleaning the parts to be soldered,
It makes the flow of solder easier. Flexible shaft (hand piece)
Power tool used for trimming or polishing You can use various tools of constant thickness, It is convenient because it is easy to insert and remove Sculpt freely on top of the texture Made of pure gold with paper thickness
In Korea, it’s called “kumboo–gold foil.” Kumboo is made by attaching a thermal fusion method on silver,
It is a Korean traditional craft technique that has been handed down for a long time. It’s similar to the traditional overlay,
Heated without media such as solder, Korea’s unique way of working Dissolve in boiled water and dye (color) Pure gold is not dyed
It penetrates a little to the surface of silver and becomes black dyeing (coloring) Properly surface treated with 3M scrubber Is to determine the finish just by the sense of the hand.
Work carefully and meticulously According to the hand sense of the worker
Quality is an important task Red wood
Amboyna burl cutting Black wood
Mpingo Cutting My little studio !! Hmmm… 1st process RPM is maintained at 2500 ~ 3000 Without attaching accessories to the brass tube
The primary reason for doing this first is, In the tree state of the rectangle
Because it’s hard to see the final pattern, Later, silver ornaments and wood patterns
To combine them in the best direction. Glue using a viscous instant adhesive The glue I used “AXIA 268” Because this adhesive takes a long time to harden,
I like it because I have time to work And it is very strong Be careful not to apply too much,
It is also important to apply the right amount Trimming is a must Brass tube inserted inside
Drill only until it’s shiny Carefully shave little by little Rough sanding process is omitted Sanding in zigzag order # 800 ~ # 1200 sanding also omitted We utilized vegetable oil (camellia oil) With coatings and finishes Without excessive force,
Finish with very light touch The nip of the fountain pen is not plated
Gold nib made of 75% pure gold (18k) Thank you for watching!

Leave a Reply

Your email address will not be published. Required fields are marked *